-
INDOT #2 Stone
2.5″ material down to 1/2″ material. Applications: Primarily used as ground stabilization material.
-
INDOT #5 Stone
1.5″ material down to 1/4″ material. Applications: Driveways, concrete and asphalt coarse
-
INDOT #8 Stone
1″ material down to 3/8″ material. Applications: Driveways, backfill uses, concrete and asphalt production.
-
INDOT #8 AP Stone
1″ material down to 3/8″ material for INDOT concrete
-
INDOT #8 Class A Stone
1″ material down to 3/8″ material. Applications: Used in the production of INDOT concrete.
-
INDOT #9 Stone
3/4″ material down to 3/8″ material. Applications: Driveway stone, backfill uses, production of concrete and asphalt.
-
INDOT #9 Dolomite
3/4″ material down to 3/8″ material. Applications: Used in high quality asphalt production.
-
INDOT #11 Stone
1/2″ material down to 1/4″ material. Applications: Top dressing for driveways, backfill uses, asphalt production.
-
INDOT #11 SC Stone
1/2″ material down to 1/4″ material for INDOT chip & seal.
-
INDOT #11 Dolomite
1/2″ material down to 1/4″ material. Applications: Used in the production of high quality asphalt.
-
INDOT #12 Stone
3/8″ material down to 1/8″ material. Applications: Top dressing for driveways, asphalt production.
-
INDOT #12 Dolomite
3/8″ material down to 1/8″ material. Applications: Used in the production of high quality asphalt
-
INDOT #24 Stone Sand (4.75mm)
Limestone Sand. Applications: Backfill uses and asphalt production.
-
INDOT #53 Crushed Stone
1.25″ material down to dust. Applications: Driveway uses, backfill uses, ground stabalization
-
INDOT #73 Crushed Stone
3/4″ material down to dust. Applications: Same uses as 53’s.
-
INDOT Revetment Rip Rap
12″ to 3″ material. Sizes can vary by location. Application: Erosion control
-
INDOT Class I Rip Rap
18″ to 3″ material. Application: Erosion control
-
INDOT Class II Rip Rap
36″ to 18″ material. Application: Erosion control
-
INDOT Uniform Rip Rap
Uniform A&B minus 8″ to 1″
-
QA #3 Stone
Specialty Product 2″ Minus Gap Graded material
-
QA #4 Stone
Specialty Product 1 1/2″ minus Gap Graded Material
-
QA #5 Stone
QA Products are Products that deviate from INDOT Spec material
-
QA #9 Stone
QA Products are Products that deviate from INDOT Spec material
-
QA #11 Stone
QA Products are Products that deviate from INDOT Spec material
-
QA #12 Stone
QA Products are Products that deviate from INDOT Spec material
-
QA #24 Stone Sand (4.75mm)
QA Products are Products that deviate from INDOT Spec material
-
#73 Stone
Commercial grade 3/4″ material down to dust
-
INDOT #8 AP Gravel
1″ minus Natural material. Applications: Production of concrete, landscape material
-
INDOT #8 Class A Gravel
1″ minus Natural material. Applications: Production of concrete, landscape material
-
INDOT #23 Sand
State approved Natural sand. Applications: Used in production of concrete and used as backfill
-
INDOT #24 Sand
State approved Natural sand. Applications: Used in the production of asphalt and used as backfill
-
INDOT #91 Gravel
3/8″ minus P Type gravel. Application: Specialty product used in production of concrete pipe
-
INDOT B-Borrow
INDOT Approved sand material for backfill
-
P-209 Stone
Application: FAA specification material used as a stabilization material under runways
-
#11 Pug Mill Mix
Cold Asphalt Paving Mix
-
AWP 300
All Weather Asphalt Patch Mix
